11-Dec-18 - 04:09 PM

Thermal Circle Text - Thermal Circle 31

Written by Hayden Daley - 25 September, 2017.
Welcome to this edition of the Thermal Circle. Daves Toys for Big Boys is now a RCRCM dealer and can supply all sailplanes listed below. These models are excellent value and very well made I have been assured that the quality is fine on these models!!! All Information is direct from RCRCM and has been edited by me for use in the Thermal Circle.com. It really is good to see all these new sailplanes available in Australia!!! All information listed below is true and accurate!!!

RCRCM 2900mm F3F/F3B Glider – 300

I designed this glider with my friend Francisco Pantano, and I want to tell you that we are very happy with the performace ... With a totally innovative concept and unique in comparison with the current designs of gliders of F3B, the 300 will surely fulfill with the expectations of the pilots and will give them the possibility to have a super competitive glider! We have flown the prototype by setting up towing and flight phases with excellent results.It has a wing area about 70dm2, that which together with a profile designed specifically for this type of surface, gives the necessary versatility to fly with great capacity thermal flight as well as develop high speeds! The wings has two wing joiner and was built with the best and most resistant materials available to allows it to be prepared for increasing demand in high competition. The 300 can be obtained in two versions F3B and F3F, for that we have designed two wings with different configurations of profiles to optimize both categories. Ok Friends!!... I want to thank my friends from RCRCM for trusting my designs and is for me a honor to be part of the RCRCM family! Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Special Features:

  • Control Surfaces: V-tail, Ailerons and Flaps
  • Two-piece hollow molded composite Carbon or Fiberglass wing design
  • Carbon Fiber reinforced wing with square wing joiner
  • Live hinges on the wing and rudder with pre-installed wipers
  • Smooth, gel-coated finish with pre-painted graphics
  • Fuselage hatch for V-tail servos
  • Glider fiberglass or full carbon with a beautiful finish comes with all necessary accessories for mounting
Includes:
  • 2900mm Wingspan F3F Glider – 300
  • Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate

Available from:


Available from:

Perfect 3430mm scale glider – DG600

DG 600 is one of RCRCM hot-selling RC Gliders, It is designed structural to withstand the stress of aerobatics maneuvers and has an advantage at air shows . DG 600 is a nice sized model and makes for a perfect first time scale ship. It also flies well on marginal lift with its HQ airfoil. These airfoils offer speed and quick response; it will hold the energy from a dive through all types of soaring aerobatics. To get it in the air, most will slope or aerotow, but with its low weight it can be launched from competition style winches or HD hi-starts. As with all our scale models, DG 600 is a full molded, high quality airframe that will only require few hours of "building" to get it ready to fly. The wing features a strong carbon spar, molded wing tips and of course the high gloss painted in mold finish. The tail surfaces are hollow molded just as the wing and are removable with screws. Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Airframe Features:

  • A molded, high quality airframe that will only require few hours of "building" to get it ready to fly
  • Control Surfaces: Rudder, Elevator, Ailerons and Flaps
  • Two-piece hollow molded composite Carbon Fiber or Glass wing design
  • Carbon Fiber reinforced wing with square wing joiner
Available from:


Available from:

RCRCM 2360mm Aerobatic Glider - Dorado

The Dorado is the latest slope aerobatic model designed by RCRCM. It follows the Vector with many improvements. The surfaces are larger all the way around for better performance. Large surfaces, ample tail volume, and nice flat fuse make this model extremely aerobatic on the slope. Stable and predictable, easy to fly! Glider for intermediate to experienced pilots, the Dorado is really an expert for aerobatics. Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Features:

  • Completely new special design.
  • Friendly Flying Characteristics
  • Top Quality finish
  • The wings are equipped with flaps and ailerons, allowing any type of mixer for specific figures and aerobatics,
  • Can be easily handled.
  • 2360mm Wingspan
Includes:
  • RCRCM 2360mm Wingspan Glider- Dorado
  • Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate

Available from:


Available from:

RCRCM RC Glider – Angela

Superb flying wing - Angela is fully molded with composite material, it has good performance in slope soaring. Angela is equipped with ailerons, flaps and rudder. It looks like a “pterodactyl” when flying in the sky! Available in 3 Versions: Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first version is available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Features:

  • Completely new special design.
  • Friendly Flying Characteristics
  • Top Quality finish
  • Easy Handling
  • 2000mm Wingspan
Includes:
  • 2000mm Wingspan RCRCM RC Glider
  • Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate

Available from:


Available from:

RCRCM 2020mm Electric Glider – E-Hornet

Glider for intermediate to experienced pilots, E-Hornet provides outstanding performance and excellent thermal flight qualities. The flight of the Hornet is very agile and maneuverable, it will go where you like in a dream. It is able to fly in virtually all conditions. E-Hornet is part of a new generation of compact, precision, full composite, hollow molded sailplanes. This new generation of sailplanes are designed and built to be extremely lightweight with great strength and full competition capabilities. Clean, efficient designs are sure to satisfy the most demanding pilots. The 2-piece, hollow molded, carbon fiber reinforced wing has a little bit of dihedral with beautifully curved leading edges and an incredibly strong, full Carbon Fiber, square wing joiner. The strong and lightweight canopy gives easy radio and battery access. If you have the mixing capabilities, combinations of ailerons and flaps can be used to significantly increase the soaring and speed capabilities. The 2-piece, composite, hollow molded wings and full flying stabilizers are easy removable. All surfaces are pre-painted in the molds for flawless external finish. The whole model uses live hinges and wipers for control surfaces. From its super-efficient X-Tail, to its new larger diameter nose area, this little guy was built for fun! Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Special Features:

  • Control Surfaces: Rudder, Elevator, Ailerons and Flaps
  • Two-piece hollow molded composite Carbon or Fiberglass wing design
  • Carbon Fiber reinforced wing with square wing joiner
  • Live hinges on the wing and rudder with pre-installed wipers
  • Smooth, gel-coated finish with pre-painted graphics
  • Full flying stabilizer with pre-installed bellcrank
  • Glider fiberglass or full carbon with a beautiful finish comes with all necessary accessories for mounting

Available from:


Available from:

RCRCM 2900mm F3F Glider – Strega

The Strega makes for an excellent F3F sport model. If looking for something that's fast and can maintain energy on it's turns, then Strega is for you!! The elliptical planform supports a very large speed envelope, with no nasty habits at low speed. The wing is two part, with a carbon joiner and a removable V-Tail. The wings and fuse are ready for your plug and play multiplex setup, allowing for super fast setups at the field or slope. The fit and finish of the Strega is similar to much more expensive models, yet it still has an industry leading level of pre-assembly! Supported by a large carbon wing joiner, the plug-in wings are of elliptical plan form which has been optimized to give a compromise between good lift distribution without the attendant tip stalling behavior sometimes seen in truly elliptical plan forms. Fin and tailplane sections are also of advanced symmetrical design and have no drag bucket at any speed. Glider for experienced pilots, Strega offers outstanding performance and excellent thermal flight qualities. It is also able to pick up speed, to convince you. It is able to fly in virtually all conditions and it is equipped with ailerons, flaps and a motor. All surfaces are pre-painted in the molds for flawless external finish. The whole model uses live hinges and wipers for control surfaces. From its super-efficient V-Tail, to its new larger diameter nose area, this little guy was built for fun! Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Special Features:

  • Control Surfaces: V-tail, Ailerons and Flaps
  • Two-piece hollow molded composite Carbon or Fiberglass wing design
  • Carbon Fiber reinforced wing with square wing joiner
  • Live hinges on the wing and rudder with pre-installed wipers
  • Smooth, gel-coated finish with pre-painted graphics
  • Fuselage hatch for V-tail servos
  • Glider fiberglass or full carbon with a beautiful finish comes with all necessary accessories for mounting

Available from:


Available from:

RCRCM 1500m Wingspan RC Glider – E-Sunbird

The Sunbird is an all molded composite glider with remarkable quality finish. It features ailerons and flaps allowing many mixes for better performance.Sunbird represents all the things we love about the bigger birds, in a more convenient package. Sunbird is part of a new generation of compact, precision, full composite, hollow molded hotlines racers. This new generation of fast airplanes is designed and built to be extremely lightweight with great strength and full competition capabilities. From its super-efficient X-Tail, to its generous nose area, this little Sunbird was built for fun! Like it's larger siblings, the Sunbird sports ailerons and flaps on its two piece wing. The aerofoil section is probably quite advanced for this kind of plane and gives a very wide speed range and possibility of operation in a wide range of wind conditions. Added to that, the radio bay is large enough to enable installation of the servos and radio pack without resorting to micro surgery, while the fuselage and in fact the whole plane still has a pleasing and balanced shape. Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers carbon), the last two versions are customized. Detailed Description:

  • Sunbird flying panels and control surfaces are large enough to be effective in almost any conditions, while the flaps make it possible to land the plane slowly and safely even at small flying sites.
  • Flight tests in a wide range of conditions have revealed a very good turn of speed, high maneuverability, no bad habits, and very controllable landing characteristics.
  • Clean, efficient designs are sure to satisfy the most demanding pilots.
  • For the expert and novice alike the Sunbird represents a lot of “big” sailplane features in a small attractive package.
  • Control Surfaces: Rudder, Elevator, Ailerons and Flaps
  • Two-piece hollow molded composite Carbon Fiber or Glass wing design
  • Carbon Fiber reinforced wing with square wing joiner
  • Live hinges on the wing and rudder with pre-installed wipers
  • Smooth, gel-coated finish with pre-painted graphics
  • Full flying stabilizer with pre-installed bellcrank with pushrod

Available from:


Available from:

RCRCM 3000mm Wingspan F3B/F Glider – TABU

TABU is an extraordinary top level flying machine, designed focused on competition and also with an excellent handling capability. The new TABU will put aside the previous concept of what a competition glider tail should look alike.This elevator linkage was thought for zeroslop and perfect trim but to be as light as extremely strong. With bases on previous proved designs, the new TABU goes one step forward in performance, thanks to its new profiles in a redesigned wing for a very wide (and good) flight envelope. It´s advanced design concepts and building quality will certainly help you with today´s high competition demands and with no compromise in structural roughness (and it will surely put a smile of joy on your face in every flight). Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Features:

  • Tabu is a great little HLG. Light, strong and looks as good as it flies
  • This elevator linkage was thought for zero slop and perfect trim but to be as light as extremely strong.
  • With bases on previous proved designs, the new TABU goes one step forward in performance, thanks to its new profiles in a redesigned wing for a very wide (and good) flight envelope.
  • 3000mm wingspan
  • Fuselage is made of carbon/Kevlar epoxy, wing is carbon D-box covered with. Large carbon fiber canopy permits easy access to servos, receiver and battery pack. Wing is attached to the fuselage by two nylon screws. The tail is made out made of light molded composite with carbon reinforcement.

Available from:


Available from:

RCRCM 2890mm/2905mm Wingspan F3B/F3F RC Glider -TANGO

Inspired by one of the most beautiful types of musics in the world, Argentine Tango, full of elegance and majesty, represented in this wonderful glider flying with fine lines and versatility to meet all expectations of any pilot. This glider was designed thinking to fly in F3B/F3F competition. TANGO performed very well in the F3B World Cup in Germany last 2013 with great success. Electric version is also available and We are sure that will be a surprising experience to fly that ship using this kind of configuration…you will feel a rocket in your hands!! Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Features:

  • Tango (motorless version is 2890 wingspan, motor version is 2905mm wingspan)has two blended high performance airfoils in the wings, that allow the pilot to fly high speed and slow when he need it. This advanced design completed with the RCRCM technology, make this glider and excellent machine to fly.
  • Able to fly in almost any conditions and equipped with a full house complement of ailerons, rudder, elevator and flaps.
  • Tango is a glider to use for competition or just for fun.
Includes:
  • RCRCM 2890mm/2905mm Wingspan RC Glider – TANGO
  • Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate

Available from:


Available from:

RCRCM 2500mm Wingspan Glider – TOMCAT

Tomcat is a glider for intermediate to experienced pilots. Tomcat is an expert for the flight of sustained slope type F3F. The wings have shutters and fins for all types of mixes for figures and precise landings. The fuselage is carbon reinforced at the root and a few strands are present at edge. Carbon ribbons reinforce the rear beam. Tomcat is part of a new generation of compact, precision, full composite, hollow molded sailplanes. This new generation of sailplanes are designed and built to be extremely lightweight with great strength and full competition capabilities. Clean, efficient designs are sure to satisfy the most demanding pilots. The strong and lightweight canopy gives easy radio and battery access. If you have the mixing capabilities, combinations of ailerons and flaps can be us increase the soaring and speed capabilities. The elliptical planform supports a very large speed envelope, with no nasty habits at low speed. The wing is two part, with a carbon joiner and a removable horizontal tail. The wings and fuse are ready for your plug and play harness setup, allowing for super fast assembly on the slopes. The fit and finish of the Tomcat is similar to much more expensive models, yet it still has an industry leading level of value. Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using full carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Special Features:

  • Two-piece hollow molded composite Carbon or Fiberglass wing design
  • Carbon Fiber reinforced wing with square wing joiner
  • Live hinges on the wing and rudder with pre-installed wipers
  • Smooth, gel-coated finish with pre-painted graphics
  • Glider fiberglass or full carbon with a beautiful finish comes with all necessary accessories for mounting
Includes:
  • 2.5Meter Wingspan Glider – Tomcat
  • Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate

Available from:


Available from:

CRCM 2900mm Wingspan F3F Glider – TORNADO

Tornado has been designed in order to obtain a high-performance F3F glider , that is to say, fast, stable and very good grip in turns. The drawing is rather atypical so that the TORNADO is recognizable at first glance! Glider for intermediate to experienced pilots, Tornado will go where you like in a dream. It is able to fly in virtually all conditions. It is part of a new generation of compact, precision, full composite, hollow molded sailplanes. This new generation of sailplanes are designed and built to be extremely lightweight with great strength and full competition capabilities. Clean, efficient designs are sure to satisfy the most demanding pilots. The 2-piece, hollow molded, carbon fiber reinforced wing has a little bit of dihedral with beautifully curved leading edges and an incredibly strong, full Carbon Fiber, square wing joiner. The strong and lightweight canopy gives easy radio and battery access. All surfaces are pre-painted in the molds for flawless external finish. The whole model uses live hinges and wipers for control surfaces. From its super-efficient V-Tail, to its new larger diameter nose area, this little guy was built for fun!

I am very happy to have designed the TORNADO for RCRCM! This glider has been designed in order to obtain a high-performance f3f glider , that is to say, fast, stable and very good grip in turns. The drawing is rather atypical so that the TORNADO is recognizable at first glance! RCRCM is a strong company of design and manufacturing, and that’s why I naturally approached them to start the production of the TORNADO. Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Special Features:

  • 2900mm slope glider
  • Control Surfaces: Rudder, Elevator, Ailerons and Flaps
  • Two-piece hollow molded composite Carbon or Fiberglass wing design
  • Carbon Fiber reinforced wing with square wing joiner
  • Live hinges on the wing and rudder with pre-installed wipers
  • Smooth, gel-coated finish with pre-painted graphics
  • Full flying stabilizer with pre-installed bellcrank
  • Glider fiberglass or full carbon with a beautiful finish comes with all necessary accessories for mounting
Includes:
  • RCRCM 2900mm Wingspan Glider - Tornado
  • Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate

Available from:


Available from:

2000mm Wingspan Slope Glider – TUCAN

Tucan is part of a new generation of compact, precision, full composite, hollow molded sailplanes. This new generation of sailplanes are designed and built to be extremely lightweight with great strength and full competition capabilities. Clean, efficient designs are sure to satisfy the most demanding pilots. Tucan was designed with the purpose that every pilot could experience a flight with a similar performance than a F3F glider. Built with the best and most resistant materials available, excellent airfoil and V-tail, we intend to get a close, fast and precise flight of a glider in slope. From it's super efficient V-Tail design, to it's generous long nose section, this little guy was built for fun! Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Special Features:

  • Control Surfaces: Rudder, Elevator, Ailerons and Flaps
  • Two-piece hollow molded composite Carbon Fiber or Glass wing design
  • Carbon Fiber reinforced wing with square wing joiner
  • Live hinges on the wing and rudder with pre-installed wipers
  • Removable V-Tail
Includes:
  • RCRCM 2000mm Wingspan Glider – TUCAN
  • Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate

Available from:


Available from:

RCRCM 2900mm Wingspan Glider – E-TYPHOON PLUS

Typhoon plus is a big brother of the Typhoon, with a wingspan of 2900mm, it is a great F3F glider. The quality of construction allows it to fly ballast and go fast without any problem, you will have much fun to fly this version of Typhoon. Glider for intermediate to experienced pilots. Aimed at the flyer who has made his bones on smaller ships and now wants something with higher potential, the Typhoon Plus offers sparkling slope performance, but turns into a pussycat when thermal. For experienced flyers, the plane handles like a dream, has no vices and yet is capable of amazing performance in the right hands. Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Features:

  • Control Surfaces: Rudder, Elevator, Ailerons and Flaps
  • Two-piece hollow molded composite Carbon Fiber or Glass wing design
  • Carbon Fiber reinforced wing with square wing joiner
  • Live hinges on the wing and rudder with pre-installed wipers
  • Smooth, gel-coated finish with pre-painted graphics
  • Full flying stabilizer with pre-installed bellcrank
Includes:
  • 2900mm Wingspan Glider – E-Typhoon Plus
  • Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate

Available from:


Available from:

RCRCM 2000mm Glider – Emotion

Glider for intermediate to experienced pilots, the Emotion offers outstanding performance and excellent thermal flight qualities. Flight of Emotions is very agile and maneuverable, it will go where you like in a dream. It is able to fly in virtually all conditions and it is equipped with ailerons, a drift, depth and the electric version of an engine. The Emotions can of course perform aerobatic maneuvers or turn into a real rocket, of course you can slow it down for a landing or to catch him by hand. Available in 4 Versions: Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives adequate stiffness and torsion stability with lower weigh and cost. Highly recommended for sport flying. Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first two versions are available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Special Features:

  • Control Surfaces: Ailerons and Flaps, Elevator, Rudder
  • Two-piece hollow molded composite Carbon or Fiberglass wing design
  • Carbon Fiber reinforced wing with square wing joiner
  • Live hinges on the wing and rudder with pre-installed wipers
  • Smooth, gel-coated finish with pre-painted graphics
  • Glider fiberglass or full carbon with a beautiful finish comes with all necessary accessories for mounting
Includes:
  • 2000mm Wingspan Glider – Emotion
  • Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate

Available from:


Available from:

RCRCM 1400mm Wingspan RC Glider – Falcon

Falcon is the new F5D glider, it is with simple construction and very easy to build, the shape of the model is very smooth. It is a high quality F5D pylon glider, with mature design, precise moulding, best material and made by experieced staff. In light weight, it can be equiped with light power and propeller to fly as F5B, or fly F5D with high power system. The nose area has enough room for the electronics, you can put 5S 2200mah lipo battery. Or you can only install with 3 servos to fly as slope glider(the flight weight will be only 450g), it can fly in any condition whether light wind or strong wind, to fly in high speed on the slope will be a lot of fun! Available in 3 Versions: Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability. The first version is available in stock. Besides, we have Light Carbon Version(less weight) and Double Carbon Version(with two layers of carbon), the last two versions are customized. Detailed Description:

  • Falcon flying panels and control surfaces are large enough to be effective in almost any conditions, while the flaps make it possible to land the plane slowly and safely even at small flying sites.
  • Flight tests in a wide range of conditions have revealed a very good turn of speed, high maneuverability, no bad habits, and very controllable landing characteristics.
  • Clean, efficient designs are sure to satisfy the most demanding pilots.
  • For the expert and novice alike the Sunbird represents a lot of “big” sailplane features in a small attractive package.
  • Control Surfaces: Rudder, Elevator, Ailerons
  • Two-piece hollow molded composite Carbon Fiber or Glass wing design
  • Carbon Fiber reinforced wing with square wing joiner
  • Live hinges on the wing and rudder with pre-installed wipers
  • Smooth, gel-coated finish with pre-painted graphics
  • Live hinged stabilizer with pre-installed bellcrank with pushrod
Includes:
  • 1400mm Wingspan RC Glider – Falcon
  • Ballast Tube(for Motorless Glider only), Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate

Available from:
Available from:


That's all from the Thermal Circle, Happy, Safe and Succesful soaring!!! More Thermal Circle coming soon!!!

Click on any banner ad to transfer to the website




Soaring

Direct from the Australian Soaring Scene