25-May-24 - 07:43 AM

Recommended Servos - MKS 3

Written by Hayden Daley - 08 May, 2023.

Available from:

MKS HV6125E MG Digital Servo

MKS HV6125E

Weight

0.63oz (19.86g)

Dimensions

0.9 X 0.47 X 1.07in
(23 X 12 X 27.25mm)

Features

High Voltage

Motor type

Japan-made CL Dead Band:0.0008ms

Torque

31.9oz-in (2.3kg-cm) @6v
41.7oz-in (3.0kg-cm) @7.4v
48.6oz-in (3.5kg-cm) @8.2v

Specification

Chrome-Titanium alloy gear

Speed

0.07sec/60deg. @6.0v
0.06sec/60deg. @7.4v
0.05sec/60deg. @8.2v

Available from:

the MKSHV-6125Eis part of the latest range of new release High Voltage servos comming from MKS.

Superior MKS Quality, once you have tried MKS, you will know you have tried the very best!

Never has a glider servo been so accurate and tight! This is what we all have been searching for!!

The HV-6125E has a full CNC Aluminum case that has been milled to the highest of tolerances.

HV-6125E makes an excellent V-tail sailplane servo.

Torque:

31.9oz-in (2.3kg-cm) @6v

41.7oz-in (3.0kg-cm) @7.4v

48.6oz-in (3.5kg-cm) @8.2v

Speed:

0.07sec/60deg. @6.0v

0.06sec/60deg. @7.4v

0.05sec/60deg. @8.2v

Weight: 19.86g

Dimensions: 23 x 12 x 27.25 mm

Working Voltage: 3.8~8.4 V DC Volt

Working frequency: 1520s / 333hz

Dead Band: 0.0008 ms (Default)

Bearing: Dual Ball Bearings

Motor: Coreless Motor

Gear: Chrome-Titanium alloy gear

Available from:

MKS HV6130 wing servo

MKS HV6130 wing servo

Weight

0.79oz (22.5g)

Dimensions

1.18 X 0.39 X 1.17in
(30 x 10 x 29.8mm)

Features

Dead Band: 0.001 ms (Default)

Motor type

Coreless

Bearing Type

3 Ball bearing + 2 Jewel bearing

Torque

83.3oz-in (6.0kg-cm) @6.0V
106oz-in (7.6kg-cm) @7.4V
113oz-in (8.1kg-cm) @8.2V

Battery config

1s, 2s lipo, Life, Nimh 4 or 5 cell

Speed

0.14sec/60deg. @6.0v
0.11sec/60deg. @7.4V
0.10sec/60deg. @8.2V

The newest addition to the MKS family of Glider Servos, the HV6130!!

We are proud to announce the release of the HV6130/HV6130H to our range of MKS servos. SoaringUSA and MKS USA have been very busy testing and testing these fine servos since the end of 2015. Well"FINAL ANSWER"these are the best servos to date! With the traditional "perfect" gear train, the best resolution in the marketplace, and this servo is priced right in line with other servos that do not even begin to compare. These servos can run on 1s, 2s lipos. They can run on 4 or 5 cell nimh, or Life Packs. We believe this is the best glider servo in it's class, hands down!

Available from:

MKS HV6150- HV Digital Servo

MKS HV 6150 Wing Servo.

TheMKS HV6150is part of the latest range from MKS.
Once you have tried MKS, you will know you have tried the very best!
Never has a servo been so accurate and tight! This is what we all have been searching for.

SKU

MKS-HV6150

Dead Band

0.001 ms

Spline Size

5mm

Control System

+Pulse Width Control

Working Frequence

1520s / 333Hz

Operating Voltage

3.5~8.4 V DC Volt (2S Lipo un-regulated)

Operating Speed (4.8V)

0.274 sec/60° degrees at no load

Operating Speed (6V)

0.190 sec/60° degrees at no load

Stall Torque (4.8V)

6.3 Kg/cm (87.4 oz/in)

Operating Speed (7.4V)

0.174 sec/60° degrees at no load

Operating Speed (8.4V)

0.159 sec/60° degrees at no load

Stall Torque (6V)

8.2 Kg/cm (113.8 oz/in)

Stall Torque (7.4V)

9.8 Kg/cm (136.1 oz/in)

Stall Torque (8.4V)

10.9 Kg/cm (151.3 oz/in)

Motor Type

Coreless Motor

Potentiometer Drive

Direct Drive

Bearing Type

2*Oil-retaining Bearing + 2*Jewel Bearing

Gear Type

Metal Alloy gear

Dimensions

23.5 x 11 x 25 mm

Weight

16.4g (0.578oz)

Available from:

MKS HV6150H- HV Digital Servo

TheMKS HV6150His part of the latest range from MKS.
Once you have tried MKS, you will know you have tried the very best!
Never has a servo been so accurate and tight! This is what we all have been searching for!!

SKU

MKS-HV6150H

Dead Band

0.001 ms

Spline Size

5mm

Control System

+Pulse Width Control

Working Frequence

1520s / 333Hz

Operating Voltage

3.5~8.4 V DC Volt (2S Lipo un-regulated)

Operating Speed (4.8V)

0.274 sec/60° degrees at no load

Operating Speed (6V)

0.190 sec/60° degrees at no load

Stall Torque (4.8V)

6.3 Kg/cm (87.4 oz/in)

Operating Speed (7.4V)

0.174 sec/60° degrees at no load

Operating Speed (8.4V)

0.159 sec/60° degrees at no load

Stall Torque (6V)

8.2 Kg/cm (113.8 oz/in)

Stall Torque (7.4V)

9.8 Kg/cm (136.1 oz/in)

Stall Torque (8.4V)

10.9 Kg/cm (151.3 oz/in)

Motor Type

Coreless Motor

Potentiometer Drive

Direct Drive

Bearing Type

2*Oil-retaining Bearing + 2*Jewel Bearing

Gear Type

Metal Alloy gear

Dimensions

23.5 x 11 x 25 mm

Weight

16.4g (0.578oz)

Available from:

MKS HV69 Servo

A high voltage, high torque, mini servo with metal gears that is suited for a wide range of applications.

Weight

21 g (0.74 oz)

Motor type

CL Dead Band 0.001ms

Voltage

3.8V~8.4 vDC

Shaft

25t 6mm spline

Frequency

1520µs / 333Hz

Torque @ 4.8v

6.0 kg-cm / 83.3 oz-in

Torque @6.0

104.2 oz-in / 7.5 kg-cm

Torque @7.4v

127.8 oz-in / 9.2 kg-cm

Torque @8.2v

141.7 oz-in / 10.2 kg-cm

Dimensions (SAE)

1.14 x 0.51 x 1.13 in

Dimensions (metric)

29 x 13 x 28.7 mm

MKS HV69

The MKS HV9 is part of the latest range from MKS. It is a new, high voltage, high torque, mini servo with metal gears that is suited for a wide range of applications.

Once you have tried MKS, you’ll know you have tried the very best! Never has a servo been so accurate and tight!

The HV69 features a 25t 6mm spline to allow use of a large number of aftermarket horns.

SPECIFICATIONS
Torque @4.8v: 6.0 kg-cm / 83.3 oz-in
Torque @6.0v: 7.5 kg-cm / 104.2 oz-in
Torque @7.4v: 9.2 kg-cm / 127.8 oz-in
Torque @8.2v: 10.2 kg-cm / 141.7 oz-in
Torque is measured at stall

Speed @4.8v: 0.17s/60 deg
Speed @6.0v: 0.13ss/60 deg
Speed @7.4v: 0.11ss/60 deg
Speed @8.2v: 0.10ss/60 deg
Speed is for 60 degrees rotation at no load

Weight: 21 g (0.74 oz)

Dimensions: 29 x 13 x 28.7 mm
1.14 x 0.51 x 1.13 in

Working Voltage: 3.8V~8.4 vDC (2S LiPo un-regulated)
Working Frequency: 1520µs / 333Hz
Dead Band: 0.001 ms (default)
Bearing: 2 Ball Bearing
Gear: metal alloy geared
Motor: coreless motor

Available from:

MKS HV70 Servo

A wide voltage 3.7v ~ 8.4v DLG servo. Ultra Light 5.4g

Weight

21 g (0.74 oz)

Motor type

CL Dead Band 0.001ms

Voltage

3.8V~8.4 vDC

Shaft

25t 6mm spline

Frequency

1520µs / 333Hz

Torque @ 4.8v

6.0 kg-cm / 83.3 oz-in

Torque @6.0

104.2 oz-in / 7.5 kg-cm

Torque @7.4v

127.8 oz-in / 9.2 kg-cm

Torque @8.2v

141.7 oz-in / 10.2 kg-cm

Dimensions (SAE)

1.14 x 0.51 x 1.13 in

Dimensions (metric)

29 x 13 x 28.7 mm

Dead Band

0.001ms (Default)

Spline Size

4mm

Control System

+Pulse Width Control

Working Frequency

1520µs / 333Hz

Operating Voltage

3.7 ~ 8.2 V DC Volts (for 2S ~ 1S LiPo)

Operating Temperature Range

-10 to + 60 Degree C

Operating Speed (4.8V)

0.110 sec/60° degrees at no load

Operating Speed (6V)

0.085 sec/60° degrees at no load

Stall Torque (4.8V)

2.0 Kg/cm (27.8 oz/in)

Operating Speed (7.4V)

0.064 sec/60° degrees at no load

Operating Speed (8.4V)

0.060 sec/60° degrees at no load

Stall Torque (6V)

2.6 kg/cm (36.1 oz/in)

Stall Torque (7.4V)

2.9 Kg/cm (40.3 oz/in)

Stall Torque (8.4V)

3.1 Kg/cm (43.1 oz/in)

Motor Type

Coreless Motor

Potentiometer Drive

Direct Drive

Bearing Type

1 Copper Bushing

Gear Type

Metal Alloy Gears

Connector Wire Length

15cm

Dimensions

18.6 x 7 x 16.7 mm

Weight

5.4 g

Available from:

MKS HV737 Servo

The MKS HV737 is the latest release of high speed, high torque, HV mini servos from MKS.

This servo will be perfect in several scale and large sailplane offerings. It’s perfect for elevator, rudder and flap applications.

Weight

1.36oz (38.6g)

Dimensions

0.59 X 1.12 X 1.52in
(15 x 28.5 x 35.5mm)

Features

Metal alloy gearing
9mm VR, Ultra-high resolution

Motor type

12 x 20 mm Coreless motor. Highly efficient and more durable.

Bearing Type

2 Ball Bearing

Torque

@6.0V 115.3oz-in (8.3kg-cm)
@7.4V 126.4oz-in (9.1kg-cm)
@8.2V 141.7oz-in (10.2kg-cm)

Specification

Working frequency: 1520 nano-seconds/333Hz
Dead band: 0.001 ms (default)

Speed

@6.0V 0.12s
@7.4V 0.1-s
@8.2V 0.09s

Voltage

Working voltage 3.8 ~ 8.4 V DC (2S Lipo, un-regulated)

Available from:

MKS HV737 Servo

The HV737 is the latest release of high speed, high torque, HV mini servos from MKS.

Once you have tried MKS, you will know you have tried the very best! Never has a sailplane servo been so accurate and tight and now in high voltage! The HV737 has a full CNC Aluminum case that has been milled to the highest of tolerances. The aluminum housing is a great choice for HV servos, as the heat generated from HV usage is quickly dissipated through the casing just like a heat sink. This servo will be perfect in several scale and large sailplane offerings. It’s high torque, speed, and compact size will be perfect in elevator, rudder and flap applications.

Available from:

MKS HV75K Servo

MKS DS75K Precision Metal gear micro servo

Weight

0.264oz (7.5g)

Dimensions

0.91 X 0.35 X 0.66in
(23 x 9 x 16.7mm)

Features

Dead Band: 0.001 ms (Default)

Motor type

Coreless

Bearing Type

1 Ball bearing + 1 Oil-retaining bearing + 2 Jewel bearings

Torque

19.4oz-in (1.4kg-cm) @3.7V
31.9oz-in (2.3kg-cm) @6.0V
38.9oz-in (2.8kg-cm) @7.4V
45.8oz-in (3.3kg-cm) @8.2V

Battery config

1s, 2s lipo, Life,

Speed

0.21sec/60deg. @3.7V
0.13sec/60deg. @6.0V
0.10sec/60deg. @7.4V
0.09sec/60deg. @8.2V

TheMKS HV75Kis the news micro release from MKS. For DLG and small F5D's the 75K sets the bar. This servo is the newest HV version of the tested and well recieved MKS DS75. It is also available in theHV75K-N, without lugs.

Great choice for DLG, HLG, or F3K

Working Voltage: 3.7 ~ 8.2 V DC Volts (for 2S ~ 1S LiPo)

Working Frequency: 1520µs / 333Hz

Dead Band: 0.001 ms (Default)

Bearing : 1 Ball bearing + 1 Oil-retaining Bearing + 2 Jewel Bearing

Motor: Coreless Motor

Gear: Metal Alloy Gear

Case: 6061 Aluminum CNC Casing

Available from:

MKS HV75K-R Servo

MKS DS75K-R Precision Metal gear micro servo with side mounting tabs.

Weight

0.264oz (7.5g)

Dimensions

0.91 X 0.35 X 0.66in
(23 x 9 x 16.7mm)

Features

Dead Band: 0.001 ms (Default)

Motor type

Coreless

Bearing Type

1 Ball bearing + 1 Oil-retaining bearing + 2 Jewel bearings

Torque

19.4oz-in (1.4kg-cm) @3.7V
31.9oz-in (2.3kg-cm) @6.0V
38.9oz-in (2.8kg-cm) @7.4V
45.8oz-in (3.3kg-cm) @8.2V

Battery config

1s, 2s lipo, Life,

Speed

0.21sec/60deg. @3.7V
0.13sec/60deg. @6.0V
0.10sec/60deg. @7.4V
0.09sec/60deg. @8.2V

Available from:

MKS HV9767 Ultra Torque High Voltage Digital Servo

MKS HV9767 High Voltage Ultra Torque Digital Servo

Weight

1.35oz (38.5g)

Dimensions

1.40 X 0.59 X 1.12in
(35.5 X 15 X 28.5mm)

Motor type

Japan-made Coreless Motor

Torque

94.4oz-in (6.8kg-cm) @6.0V
118oz-in (8.5kg-cm) @7.4V
130oz-in (9.4kg-cm) @8.2V

Specification

Chrome-Titanium alloy gear

Speed

0.090sec/60deg. @6.0V
0.078sec/60deg. @7.4V
0.070sec/60deg. @8.2V

TheMKS HV9767is the latest release of Ultra torque High Voltage servos from MKS.
Once you have tried MKS, you will know you have tried the very best! Never has a sailplane servo been so accurate and tight and now in High Voltage! The HV9767 has a full CNC Aluminum case that has been milled to the highest of tolerances. The aluminum housing is a great choice for HV servos, as the heat generated from HV usage is quickly dissipated through the casing just like a heat sink. This servo will be perfect in several scale and large sailplane offerings. It's high torque and compact size will be perfect in elevator, rudder and flap applications.

Specifications:MKS HV9767

Torque: 6.8 kg-cm (6.0V), 8.5 kg-cm (7.4V), 9.4 kg-cm (8.2V)

Speed: 0.090 s (6.0V), 0.078 s (7.4V), 0.070 s (8.2V)

Weight: 38.55 g

Frequency: 1520µs / 333hz

Dead Band: 0.001 ms (Default)

Bearing Type: 2BB

Dimensions: 35.5 x 15 x 28.5 mm

Motor Type: Coreless Motor

Gear Type: Chrome-Titanium alloy gear

Current Draw: 2.6A max.(8.2V), 2.4A max.(7.4V), 2.0A max (6.0V)

Manufactured By: MKS Servos

Thats all from the Thermal Circle happy safe and successful soaring. Hayden Daley August 2022.

Available from:

Click on any banner ad to transfer to the website




Text-based competition soaring information website established 2007