Cockpit SX 12

Features:

• Future-oriented 12-channel remote control 12 fully proportional control channels / 24 encoders
• 32 bit processor / 4096 steps
• 2.4 GHz MLINK transmission ensures ultra-fast, digital signal transmission with real-time telemetry
• Mode changeable
• Analog and digital servo mode
• IOAT antenna integrated radiation-optimized antenna technology with extremely high range
• 3.5 "large TFT colour display with telemetry display and day / night changeover, natural daylight
• 4 compartment ball-bearing billet units (from the PROFI TX)
• Fully equipped with all necessary controls and switches
• Voice output (D, E, F) via loudspeaker or earphone jack
• USB socket (charge transmitter charge, PC interface for firmware updates, data management
• Modern, ergonomically optimized housing design
• Low weight
• 2.4 GHz Transmission technology M-LINK integrated with SAFE-LINK
• Long operating time up to 24h
• 3 flight phases (acro)
• 4 flight phases (Heli)
• Heli GAS and pitch curves (9 points) separately adjustable for each flight phase
• Aileron differential, separately adjustable for each flight phase
• Snap Flap Butterfly function
• Free SERVO channel allocation
• Wireless teacher / student operation possible with optional COPILOT
• Multifunctional USB socket (charge transmitter recharge, PC interface for firmware updates, data management)
• Micro SD card for model storage 200 model memory
• Model copy function

COCKPIT SX 12-channel M-LINK Transmitter – smarter than ever!

The MULTIPLEX COCKPIT SX 12 sets new standards in the field of 12-channel handheld transmitters. Touch, control and fly with the operation like a smartphone! This makes the Multiplex COCKPIT SX 12 easy to program through its app icons on the colour touch screen. The new software SAFE-LINK, in combination with numerous new software features makes this the 12 channel transmitter to have.

The model assistant guides you intuitively through an ingenious touch concept with clear screens and many self-explanatory graphics. Easy-to-read TFT colour display screen (even in bright sunlight) 3.5 ", 320x240 pixels, with automatic day / night switching. Transmitter operating time of up to 24 hours is possible.

Unique in this class is the intuitive control of functions via motion sensors (position or rotational speed sensors). For example, for camera movements, triggering speech output etc. Move the transmitter in a pre-determined direction and you can trigger certain functions to take place.

The Multiplex COCKPIT SX 12 is ergonomically designed so it is easy to hold for extended periods and all the controls fall easily to hand. The transmitter has a very pleasant housing size and is super light in the hand. All switches and controls can be reached comfortably without taking your thumb off the stick. The channel assignment is individually selectable. This is also an ideal remote control for RC surface models, RC helicopters and RC-Quadcopters with suitable menus incorporated into the powerful software. Of course, it is a development of the popular Cockpit SX 9 which is widely acclaimed for ease of use with RC model aircraft.

The COCKPIT SX 12 is 100% developed and built in Germany.

TFT colour touch display

• Clear transflective color display 3.5 ", 320 x 240 pixels, touchscreen with meaningful symbols and large, easy-to-read digits / letters. Can be read with sunlight without background lighting: ideal for model sports. Extremely energy saving in outdoor operation due to automatic day / night switching. Transmitter operating time up to 24 hours is possible.

Simple and extensive programming

• unlimited possibilities via the new model assistant
• Intuitive operation thanks to an ingenious touch concept with clear screens and many self-explanatory graphics. A clever model assistant with a wide range of options for adjusting the values via the touch screen. Easy adjustment via slider, direct value input with alphanumeric keyboard, +/- and buttons for the fine adjustment ensure the simplest programming of your models.

Super comfortable model memory management

• The Multiplex COCKPIT SX 12 is equipped with 200 internal model memories, the model memory is stored on the internal SD card in the .xml format. Simple model memory management on the PC via USB mass storage is therefore easily possible.

Outstanding speech output

• With more than 450 words, numbers and phrases, it is one of the most advanced systems of its kind ever installed in a hand-held transmitter. The use of this system allows Multiplex COCKPIT SX 12 pilots to receive critical telemetry data and station functions, while avoiding taking your eyes away from flying. The Multiplex COCKPIT SX 12, if required, tells you the specific sensor and timer values. Should an alarm be triggered, you do not have to look at the display to see what's going on, the Multiplex COCKPIT SX 12 tells you.

Back channel / Telemetry:

When using a telemeter capable receiver, the current voltage of the receiver power supply is displayed on the display of the transmitter. If an adjustable minimum voltage is exceeded, an acoustic signal warns of a draining receiver battery. Without a sensor, the connection quality (LQI) on the transmitter display can also be displayed in % values. An additional security solution ! In addition, up to 8 telemetry data outputs can be displayed on the display (depending on the sensors connected to the receiver, eg voltage, current, temperature, etc.) (application examples: motor temperature, drive voltage, current consumption of the drive). The storage of the telemetry data can also be found in the model with the optional MULTIPLEX Flight Recorder (# 8 5420).

Wireless teacher / student operation:

The Multiplex COCKPIT SX 12 M-LINK can be standard as both teacher and student radio stations. All L / S-compatible M-LINK transmitters can be used as a student or teacher transmitter. The optional COPILOT module (# 4 5184) is required for the teacher operation. The COCKPIT SX 12 operates with selective L / S operation. This allows the complete transfer or, depending on the learning progress of the student, the transfer of individual control functions to the student. Only by touching the sticks the teacher can take over the model again. Dual-rate and Expo phase-specific separately adjustable for 3 axis (cross, height, side)

4 Timers:

• Timer 1: mm: ss start / stop switch selectable, alarm function, voice output, vibration
• Timer 2: mm: ss start switch selectable, alarm function, voice output, vibration
• Timer 3: hh: mm Transmitter operating time counter
• Timer 4: hh: mm Day time

Cockpit SX 9

Description:

Cockpit SX 9-channel M-LINK radio control system – it’s never been easier!

The MULTIPLEX COCKPIT SX 9 is a development of the popular and proven seven-channel RC system for the forward-looking beginner and the demanding leisure pilot. The COCKPIT SX 9 is 100% developed and built in Germany. ‘Made in Germany’ quality! Full-colour TFT touch-screen Efficiently arranged transflective full-colour 3.5" touch-screen, 320 x 240 pixels, with informative symbols and large, clearly legible numbers and letters. Legible in sunlight without backlighting: perfect for modelling. Automatic day / night switching for extreme power-saving when used outdoors. Up to 24 hours transmitter operating time possible.

New Model Assistant: the key to simple, comprehensive programming facilities

Intuitive to use thanks to an ingenious touch-screen design with clearly arranged displays and many self-explanatory graphics. Convenient Model Assistant with extensive facilities for altering values using the touch-screen. Ultra-simple adjustments using a slider, direct value input using the alpha-numeric keypad, and /- buttons for fine-tuning, ensuring ultra-simple programming of your models.

Super-convenient model memory management

The COCKPIT SX9 features 200 individual internal model memories; the memories are stored on the internal SD card in .xml format, making it an easy, convenient matter to manage model memories on your PC using USB memory media.

Superlative speech output

With more than 450 words, numbers and phrases it is one of the most advanced systems of its type ever to have been incorporated in a hand-held transmitter. This system keeps Cockpit SX9 pilots aware of critical telemetry data and transmitter functions without having to take their eyes from the model. When necessary, the Cockpit SX9 speaks specific sensor values to you. If an alarm should be triggered, you don’t have to look at the screen to see what’s happened: the Cockpit SX7 /9 tells you.

Downlink channel / Telemetry

If a telemetry-capable receiver is employed, the actual voltage of the receiver power supply is displayed on the transmitter’s integral screen. If the voltage falls below a (user-variable) minimum value, an audible signal is emitted as a warning that the receiver battery is almost flat. The radio link quality (LQI) can also be displayed on the transmitter screen as a percentage value - without requiring a sensor.

An additional safety advantage!

It is also possible to display up to eight telemetry values from the model - depending on the sensors connected to the receiver, e.g. battery voltage, current, temperature, etc. - on the screen. Typical uses: motor temperature, flight pack voltage, motor current drain. The telemetry data can be stored in the model using the optional MULTIPLEX FlightRecorder (# 8 5420). Freely configurable on-screen display of sensor values, dynamic display adjustment

Wireless Trainer mode operations

In its standard form the COCKPIT SX M-LINK can operate both as Teacher and Pupil transmitter. The other transmitter - Pupil or Teacher - can be any M-LINK transmitter with Trainer facilities. The optional COPILOT module (# 4 5184) is required for Trainer mode operations. The COCKPIT SX provides selective Trainer mode. This allows full control transfer to the trainee or - depending on the trainee’s skill level - the transfer of individual control functions. The Teacher can resume control of the model simply by moving the sticks. Dual-Rate and Expo can be set up separately for each flight phase for three axes (aileron, elevator, rudder) plus Expo for throttle.

3 timers

• Timer 1: mm:ss Selectable Start / Stop switch, alarm function, speech output, vibration
• Timer 2: mm:ss Selectable Start switch, alarm function, speech output, vibration
• Timer 3: hh:mm Transmitter operating hours timer

Helpful videos dealing with the menu system and programming are available here: MULTIPLEX FAQ Videos

Future-proof software updates

MULTIPLEX is constantly working on further development of the Cockpit SX software. You can update your transmitter at any time, so that it always reflects the latest state of development, using MULTIPLEX Launcher and the www.multiplex-rc.de website - at no charge.

Features: COCKPIT SX9

• LiFe battery, 3.3 V /4000 mAh
• SD card
• 4 proportional transmitter controls
• 3 x 2-position switch, short
• 1 x 3-position switch, short
• 2 x momentary button

Technical features:

• Innovative seven-channel radio control system – seven fully proportional control channels
• 32-bit ARM7 processor
• 2.4 GHz M-LINK transmission: secure, ultra-fast, digital signal transmission with real-time telemetry
• Analogue and digital servo mode
• IOAT aerial - integral aerial technology, optimised for output pattern, with extremely high range
• New type of 3.5" TFT full-colour touch-screen and telemetry display with DAY / NIGHT switching
• Clearly legible in daylight
• Stick units with quadruple ballraces (mechanical units from the PROFI TX)
• Fully expanded as standard, with all necessary controls and switches
• Speech output (D,E,F) via loudspeaker or earphone socket
• USB socket (transmitter battery charge, PC interface for firmware updates, data management)
• Modern, ergonomically optimised case design
• Low weight
• Integral 2.4 GHz M-LINK transmission technology
• µSD card for model data storage
• Long operating time: up to 24 hr

Software features:

• “Smartphone-like” operation: clear, efficiently organised menu structure
• Model Assistant guides you through the programming procedure
• Slide function – e.g. adjustment of COLLECTIVE PITCH CURVES by touching and pulling
• Pre-defined templates for virtually all current types of fixed-wing model aircraft and helicopter

Applications include:

• GLIDER 2 FLAP
• GLIDER 4 flaps airbrakes
• V-TAIL
• POWER MODEL AIRCRAFT
• AEROBATIC AIRCRAFT
• Jets (DELTA)
• FLYING WING
• HELI 120 degree
• HELI 90 degree flybarless
• MULTICOPTER

Safety: Throttle check, Transmitter battery monitor

• Intelligent speech output D / E / F
• Spoken telemetry data, warnings, alarms and vario signal via loudspeaker or earphone
• Real-time data transmission
• Optional sensors (Vario, GPS, fuel, temperature, voltage, current, rpm and much more)
• Vibration alarm, plus “warning” LEDs for critical alarms
• Digital trims, flight phase specific
• Can be switched off for helicopter gyro systems and MULTICOPTERS
• Three timers with speech output

Freely variable transmitter stick mode (aileron, elevator, rudder, throttle, spoiler), (1 x total time, 1 x motor run time, 1 x transmitter operating time)

• Numerous servo adjustments (travel, limit, reverse, centre)
• Dual Rate and Expo, separately variable for each flight phase
• 3 flight phases (fixed-wing)
• 4 flight phases (heli)
• Heli THROTTLE and collective pitch curves (9 points), variable separately for each flight phase
• Aileron differential, variable separately for each flight phase
• Snap-flap
• Butterfly (Crow) function
• UNRESTRICTED SERVO ASSIGNMENT
• Wireless Trainer mode
• Multi-function USB socket
• (transmitter battery charge, PC interface for firmware updates, data management)
• µSD card for model data storage - 200 model memories
• Model copy function

ROYAL SX

Description:

The ROYAL SX is the proven radio control system with MULTIPLEX 2.4 GHz M-LINK transmission technology for the demanding weekend pilot and expert. Many events have been won and titles gained with ROYAL technology.

• Comprehensive adjustment and mixer facilities for fixed-wing model aircraft and helicopters
• Various mode templates for fixed-wing models and helicopters to minimise the programming effort
• Unrestricted function assignment for transmitter controls, switches and servos
• Up to four flight phases per model, with phase-specific trim and Expo settings
• Three timers and supplementary model time and transmitter operating time
• Five function buttons and two 3D digi-adjusters for simple, user-friendly programming
• Six menu buttons provide direct access to the main menus
• Plain-language menu system in various languages (DE, EN, FR)
• Ergonomically optimised case design for hand-held and tray use
• Hinged screen
• Cruciform digital trims, flight phase-specific
• MULTIPLEX multi-function socket fitted as standard (transmitter battery charging, Trainer mode, PC interface for firmware updates, data management and simulator operation)

Further advantages:

M-LINK 2.4 GHz transmission technology Transmitter features proven integrated M-LINK 2.4 GHz transmission technology Binding and reduced-power modes for range-checking are easy and convenient to activate. Receiver FAIL-SAFE positions can be set from the transmitter using a menu.

Downlink channel / Telemetry

If you are using a telemetry-capable receiver, the receiver battery's actual voltage is displayed on the transmitter screen. If the voltage falls to a (user-variable) minimum voltage an audible signal provides a warning that the receiver pack is discharged. The radio link quality (LQI) can also be displayed on the transmitter screen as a % value without additional sensors. An extra safety enhancement! It is also possible to have up to fifteen items of telemetry data from the model displayed on the transmitter screen, depending on the sensors connected to the receiver, e.g. voltage, current, temperature, etc. Typical applications: motor temperature, flight pack voltage, motor current.

Low latency / high resolution

A digital interface to the RF module ensures extremely fast, accurate, high-resolution transmission of the control signals. The ROYAL SX M-LINK operates with a servo frame rate of 14 ms in twelve-channel mode (alternatively 21 ms in sixteen-channel mode) with 12-bit resolution (3872 steps). Switchable Normal / Fast Response: the frame rate can be changed to 21 ms in case 14 ms is too fast for the servos in the model.

Quick conversion

If you wish to continue to use your old stock of receivers exploiting conventional FM technology (PPM, M-PCM), that presents no problems: the ROYAL SX M-LINK can be converted in less than a minute - even at the flying site. The HFM4 M-LINK 2.4 GHz RF module with 2.4 GHz aerial is simply swapped for the existing FM RF module, and the long telescopic transmitter aerial replaced.

Graphic LCD screen

• 132 x 64 pixels, clearly arranged display of all information
• Screen contrast variable in a menu
• UV-stable, low-reflection
• Hinged (angle of inclination 0° / 20° / 40°)
• Optimum angle of view for every application!

Comprehensive basic equipment, all controls easily accessible

• Two 2-position switches
• Two 3-position switches
• Two 3-position switches, side-mounted

PROFI TX M-LINK

Description:

This is the new PROFI TX M-LINK tray-type transmitter – Engineered and Made in Germany.

Working in collaboration with an internationally renowned designer, our team created something extraordinary in terms of form and ergonomics. The new, sophisticated and superbly elegant design raises this transmitter to a new level of refinement. Occasionally we should allow ourselves to aim at something above the norm in terms of quality and craftsmanship!

The PROFI TX M-LINK sets new standards in its class, with 2.4 GHz transmission technology and numerous innovative and pioneering features:

• Integral aerial technology (IOAT) (Integrated Optimized Antenna Technology): integral aerial with enhanced radiation pattern, optimised for model control: double the signal density transmitted to the model, offering a significant enhancement in security.
• Secure, ultra-fast signal transmission
• Clean, clearly arranged menu structure
• LiFe battery (25 hours transmitter time) with battery management

Flexible ergonomics allow the owner to fine-tune the system individually and accurately to meet his individual needs

• For tray-mounting, use with hand-rests or neckstrap
• Swivelling stick units
• Conveniently located side-mounted proportional controls and optional switches
• Carefully positioned digital trims for easy access

The clean, clearly arranged menu structure provides:

• Programs for power models, gliders, jets and helicopters
• QuickStart
• Languages: German, English, French, Italian, Spanish
• Up to 200 model memories
• Unlimited model memory data can be saved, backed up and managed on a PC
• Up to sixteen fully proportional servo channels
• Unrestricted servo channel assignment
• 100% individual configuration of transmitter controls and switches
• Flexible mixer structure: five mixers per model, can be used as many times as required, seven mixer inputs per mixer, curve mixer
• Seven-point collective pitch / throttle curve for helicopters
• Three stopwatches
• Transmitter battery management: display of residual charge quantity (mAh) and residual operating time (hh : mm)
• Display of up to sixteen telemetry values
• Innovative flexible circuit board system minimises connector count for greater security
• Wireless Trainer system with individual control function transfer

Set contents: Nine-channel PROFI TX9 transmitter with 50 model memories Expanded with two switches 4000 mAh LiFe transmitter battery RX-9-DR pro M-LINK receiver USB lead (PC interface, charge lead)

• Large, hinged, superbly legible 4” LCD monitor
• Earphone socket
• Illuminated “warning monitor”
• Digital trims, flight phase specific
• Vibration alarm
• Maximum operating time 25 hours (LiFe transmitter battery)
• Direct menu access buttons
• Integral handle
• 3-D programming wheel (push / turn)
• Two proportional sliders 2 markers
• Ideally positioned sidemounted sliders and switches
• Completely unrestricted installation of control elements (optional switches, buttons, rotary knobs)
• USB socket (model data transfer, firmware updates, integral battery charger)
• IOAT (Integrated Optimized Antenna Technology) maximum transmission power, full range, optimised radiation pattern)

PROFI TX 16

Description:

This is the new PROFI TX M-LINK tray-type transmitter – Engineered and Made in Germany.

Working in collaboration with an internationally renowned designer, our team created something extraordinary in terms of form and ergonomics. The new, sophisticated and superbly elegant design raises this transmitter to a new level of refinement. Occasionally we should allow ourselves to aim at something above the norm in terms of quality and craftsmanship!

The PROFI TX M-LINK sets new standards in its class, with 2.4 GHz transmission technology and numerous innovative and pioneering features:

• Integral aerial technology (IOAT) (Integrated Optimized Antenna Technology): integral aerial with enhanced radiation pattern, optimised for model control: double the signal density transmitted to the model, offering a significant enhancement in security.
• Secure, ultra-fast signal transmission
• Clean, clearly arranged menu structure
• LiFe battery (25 hours transmitter time) with battery management

Flexible ergonomics allow the owner to fine-tune the system individually and accurately to meet his individual needs

• For tray-mounting, use with hand-rests or neckstrap
• Swivelling stick units
• Conveniently located side-mounted proportional controls and optional switches
• Carefully positioned digital trims for easy access

The clean, clearly arranged menu structure provides:

• Programs for power models, gliders, jets and helicopters
• QuickStart
• Languages: German, English, French, Italian, Spanish
• Up to 200 model memories
• Unlimited model memory data can be saved, backed up and managed on a PC
• Up to sixteen fully proportional servo channels
• Unrestricted servo channel assignment
• 100% individual configuration of transmitter controls and switches
• Flexible mixer structure: five mixers per model, can be used as many times as required, seven mixer inputs per mixer, curve mixer
• Seven-point collective pitch / throttle curve for helicopters
• Three stopwatches
• Transmitter battery management: display of residual charge quantity (mAh) and residual operating time (hh : mm)
• Display of up to sixteen telemetry values
• Innovative flexible circuit board system minimises connector count for greater security
• Wireless Trainer system with individual control function transfer

Set contents: Sixteen-channel PROFI TX16 transmitter with 200 model memories Expanded with four switches and two rotary knobs 4000 mAh LiFe transmitter battery RX-16-DR pro M-LINK receiver USB lead (PC interface, charge lead)

• Large, hinged, superbly legible 4” LCD monitor
• Earphone socket
• Illuminated “warning monitor”
• Digital trims, flight phase specific
• Vibration alarm
• Maximum operating time 25 hours (LiFe transmitter battery)
• Direct menu access buttons
• Integral handle
• 3-D programming wheel (push / turn)
• Two proportional sliders 2 markers
• Ideally positioned sidemounted sliders and switches
• Completely unrestricted installation of control elements (optional switches, buttons, rotary knobs)
• USB socket (model data transfer, firmware updates, integral battery charger)
• IOAT (Integrated Optimized Antenna Technology) maximum transmission power, full range, optimised radiation pattern)

PROFI TX 16

Description:

The Master Edition is a special release of MULTIPLEX's premium console transmitter, the PROFI TX 16 with new software.

Of course it is Made in Germany.

The Luxurious Features of the set: The transmitter with extravagant carbon look and new and pioneering software, the 16-channel receiver, including 35 A battery switch and WINGSTABI technology in anodized aircraft aluminium housing. The software of the Master Edition is faster and better than any predecessor and requires less than 2ms for all calculations! Features include: 12 Flight phases 11 Encoder with selectable functionality, teacher / student mode with individual switches, neutral compensation, mixing function 9Punkt curves for mixing parts, power curves either via 2-3-5-9 points, new templates MultiCopter and WINGSTABI and much more (see below). The PROFI TX transmitter has a wide range, flexible adjustment for all model types such as Gliders, power models, jets, helicopters, Multicopter, vehicles and boats.

Design

• Attractive, optimized panel design transmitter
• carrying handle integrated (optional hand rests available)
• High quality finish with extravagant Carbon-optic - and pleasant soft-touch surface

IOAT (Integrated Optimized Antenna Technology) Fully integrated transmitter antenna with application-optimized radiation for more safety and comfort. No crashing, subject to wear and be aligned in operating projecting antennas. Proven M-LINK transmission technology: safe, accurate, fast

• Transmission technology: 2.4 GHz FHSS
• Resolution: 3872 steps
• Transmission rate: 21 ms (up to 16 channels)
• All-digital signal processing for minimum latency and maximum. control precision
• 16 equivalent and -Fast, fully proportional channels

Telemetry / Feedback channel capability

• Display the values of up to 16 sensors with Min./Max.
• Sensor values assignable with their own name for best viewing (for example, ( "residual charge battery" "AC motor", "voltage ECU", "Temp.cylinder")
• Adjustable sink rate for Variometer
• Tone or Vibrate at pre set values
• ECU status message in text form
• Lighted warning bar

Contemporary LiFePO4 transmitter battery

• Operating time:> 24 h
• On-board charger in the transmitter with the most modern, intelligent battery management Indication of the running time, capacity, charge cycles, current, battery alarm set for the remaining air time)
• Charging via mini-USB port
• High quality
• 100% quality control
• Innovative and modern Flex PCB system for minimal wiring effort and little connectors for minimized risk and long life
• Rain cover for motherboard by silicone mat in the keyboard and other Actuators and sealed LCD

Perfect ergonomics individually adaptable

• Rotating characterized ergonomically adjustable double ball bearing high precision sticks (free, easiest mode switch, latch or friction selectable, joystick restoring force adjustable)
• optimally achievable, laterally arranged slide (proportional control)
• 2 slide in the middle (proportional control with a large way for sensitive operation) and "mechanical memory"
• Digital trims with activity more favourable arrangement
• free installation of switches, buttons, rotary encoders, above and sideways possible
• stick tops with either switches or buttons optional

Large 5.8 "LCD monitor

• large, foldable and look favourably disposed front
• very good contrast and excellent readability in all daylight conditions
• Low power consumption for max. Transmitter uptime
• UV-resistant and anti-reflective

Sound and Vibration

• Programmable speech in three languages (D, F, S) with 500 different Words, figures and full sentences
• High-quality built-in speakers incorporated
• Jack for optional earphone # 8 5071
• High sound quality as for precise reproduction of tones Vario
• Vibrating alert for telemetry alarms
• Speech

Easy programming

• Operation via keyboard (menu Direct access) and central 3D Rad
• Self-explanatory and clear text menus guide
• Menu languages: DE, EN, FR
• Predefined, customizable any model templates for fast and easy programming of new models (for example, Basic, Multi-rotor, 4 Flap sailors, delta / flying wing, helicopter mechanic, helicopter CCPM, electric helicopter with Governor mode, Heli Flybarless, Multicopter, vehicles, ships)
• ftware
• Completely free servo channel assignment
• Completely free transmitter controls and switches Assignment
• Flexible mixer structure for complex mixing requirements for surface models (7 different, as often assignable Servo mixers per model with 8 switchable units per mixer, 12 options, curve mixers up to 9-point curve)
• 12 flight phases, sorted into 3 groups of 4 phases.
• New flight phase name: START3, SPEED3, THERMIK3
• Teacher / student mode with individual switches, neutral compensation, mixing function
• 11 Encoder with selectable functionality:
• Suspension sequencer
• Door Sequencer
• Sequencer for motor
• Multi-position switch (1 to 2 switch => 2 to 9 positions)
• 9-point curve
• Centrifugal
• Aileron / elevator / page as a virtual switch, with adjustable switching points.
• Toggle function for all mechanical switches and buttons.
• Clock and timer are always announced via freely assignable switch.
• About Magic Switch, any sensors are used as switches.
• A new sensor class with the unit 'g', for load factor, was introduced.
• Advanced Sensor announcements.
• transverse, height, page: signals without trim (-T) now also run on Expo, D / R and path.
• For aerobatics can be switched to a particularly steep, "extreme" Expo curve.
• Gas / Pitch: 9P curves
• Gas emergency stop with extended functionality
• Slow and delay times were doubled to 12sec
• 9Pkt curves for mixing proportions
• Copilot channels, directly and with all Mix options and mixers
• Power curves optionally via points 2-3-5-9
• Copilot channels servo-sided directly attributable
• New Template MultiCopter
• New Template WINGSTABI
• New "Safety Check", with extended functionality
• Suppression of sensor alarms for 5 seconds after turning on the receiver
• 2 Magic switches for configuring Door sequencer and others.
• Firmware upgradeable, future-proof

Timers: 3 Timers

model operating time counter for each model memory

model operating time counter for each model memory

snack Alarm /

Mini-USB port

• transmitter battery and PC interface at the same time, required mini USB cable included
• PC interface PROFI TX reports itself as mass storage with folders for firmware update and Model data, thus operating system independent (Windows, Mac, ... compatible)
• Direct model data transmission from transmitter to transmitter via USB in preparation
• Quick Start (pre-programmed models of MPX program)
• Simulator Mode (transmitter logs directly as game controllers)

Media: (Data is stored in the PROFI TX and a USB cable to PC, MAC or Tablet presented updates on MPX Launcher) What's in the box

• Sender PROFI TX 16 with 16 channels and 200 model memories, equipped with 4 switches and 2 Digi-adjusters, LiFePO4 transmitter battery 4000 mAh
• WINGSTABI RX-16-DR pro M-LINK Included
• Battery switch 35 A,
• 1 USB cable
• 1 USB charging cable
• Instruction manual